Corrosion protection

See also:

Locking doors
1. Place the ignition switch in the LOCK position. 2. Close all doors. 3. Press the button on the Intelligent Key. 4. The hazard warning lights flash twice and the horn beeps once. 5. All d ...

Freeing a frozen door lock
To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry keyfob (if ...

DOOR position
When the switch is in the DOOR position 2 the map lights will illuminate under the following conditions: - ignition switch is turned to the LOCK position — remain on for about 15 seconds. ...