Daytime running light system (Canada only)

The headlights automatically illuminate at a reduced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position or in the position. Turn the position. Turn the headlight switch to the position for full position for full illumination when driving at night.

If the parking brake is applied before the engine is started, the daytime running lights do not illuminate.

The daytime running lights illuminate when the parking brake is released. The daytime running lights will remain on until the ignition switch is placed in the OFF position.

WARNING:

When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.

    See also:

    Anti-freeze
    In the winter when it is anticipated that the outside temperature will drop below 328F (08C), check the anti-freeze to assure proper winter protection. For additional information, see “Engine ...

    Loading tips
    ● The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR ...

    List of voice commands
    When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-me ...