Manual operation
Fan speed control
Turn the fan speed control
dial to manually
control the fan speed.
Push the AUTO button to return to automatic control of the fan speed.
Air recirculation Push the air recirculation button to recirculate interior air inside the vehicle. The indicator light on the button will come on.
The air recirculation cannot be activated when the air conditioner is in the front defrosting mode or the front defrosting and foot outlet mode.
Air recirculation
Push the air recirculation
button to recirculate
interior air inside the vehicle. The
indicator light on the button will come on.
The air recirculation cannot be activated when
the air conditioner is in the front
defrosting
mode or the
front defrosting
and foot outlet
mode.
Fresh air intake
Push the fresh air intake
button to draw
outside air into the passenger compartment.
The indicator light on the
button will come
on.
Automatic intake air control
In the AUTO mode, the intake air will be controlled
automatically. To manually control the intake
air, push the air
recirculation button.
To return to the automatic control mode, push
and hold the air recirculation
button or
push and hold the
fresh air
intake button
for about 2 seconds. The indicator lights (both air
recirculation and fresh air intake buttons) will
flash twice, and then the intake air will be controlled
automatically.
Air flow control
Pushing the MODE button manually controls air flow and selects the air outlet:
- Air flows from center and
side
vents.
- Air flows from center and
side
vents and foot outlets.
- Air flows mainly from foot
outlets.
- Air flows from defroster and
foot
outlets.
- Air flows from defroster
outlets.
To turn system off
Press the OFF button.
See also:
Jump starting
If jump starting is necessary, see “Jump starting”
in the “In case of emergency” section of this
manual. If the engine does not start by jump
starting, the battery may have to be replaced.
...
Compass display
Press the button when the
ignition switch
is placed in the ON position. The direction will be
displayed. ...
How to use the INFO button
Press the INFO button; the display screen shows
vehicle and navigation information for your convenience.
The information shown on the screen should be a
guide to determine the condition of the ...