Power steering fluid

The fluid level should be checked using the HOT

The fluid level should be checked using the HOT MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the power steering fluid reservoir at fluid temperatures of 32° - 86°F (0° - 30°C).

If the fluid is at or below the MIN line, add Genuine NISSAN PSF to HOT MAX or COLD MAX depending on system fluid temperature. Remove the cap and fill through the opening.

CAUTION:

- DO NOT OVERFILL.

- Recommended fluid is Genuine NISSAN PSF or equivalent.

    See also:

    Push starting
    Do not attempt to start the engine by pushing. Continuously Variable Transmission (CVT) models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ...

    Maximum load limits
    Maximum trailer loads Never allow the total trailer load to exceed the value specified in the Towing Load/Specification chart found later in this section. The total trailer load equals trailer w ...

    Displaying the command list
    If you are controlling the system by voice commands for the first time or do not know the appropriate voice command, perform the following procedure for displaying the voice command list (availabl ...