See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Heated seat (if so equipped)
Heated seat (if so equipped) The front seats are warmed by built-in heaters. 1. Start the engine. 2. Push the low or high position of the switch, as desired, depending on the temperature. The ...

USB memory operation
Audio main operation: The USB outlet connector is located in the center console. Open the lid and connect a USB memory as illustrated. Then, switch to the USB memory mode automatically. If t ...