Checking seat belt operation

Seat belt retractors are designed to lock seat belt movement by two separate methods:

● When the seat belt is pulled quickly from the retractor.

● When the vehicle slows down rapidly. To increase your confidence in the seat belts, check the operation as follows:

● Grasp the shoulder belt and pull forward quickly. The retractor should lock and restrict further belt movement.

If the retractor does not lock during this check or if you have any questions about seat belt operation, see a NISSAN dealer.

    See also:

    Tachometer
    Tachometer The tachometer indicates engine speed in revolutions per minute (rpm). Do not rev the engine into the red zones. CAUTION: When engine speed approaches the red zone, shift to a hi ...

    Safety
    The Insurance Institute for Highway Safety has designated the 2010 Nissan Cube a Top Safety Pick thanks to its top ratings of Good in all tests: frontal, side and rear impacts, and roof strength. ...

    Maximum trailer loads
    Never allow the total trailer load to exceed the value specified in the “Towing Load/Specification” chart found later in this section. The total trailer load equals trailer weight plus its car ...