See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Dehumidified defogging
This mode is used to defog the windows and dehumidify the air. 1. Press the air flow control button. 2. Turn the fan control dial to the desired position. ● When the or are selected, t ...

Front power seat adjustment
Operating tips: - The seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait for a while, then reactivate the switch. - Do not operate the power se ...