See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Clutch fluid (if so equipped)
Check the clutch fluid level in the reservoir (manual transmissions only). If the fluid level is below the MIN line, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 fluid up ...

“Call”
(Speak name) A If you have stored entries in the phonebook, you can dial a number associated with a name and location. See “Phonebook” in this section to learn how to store entries. When p ...