Locking doors

Locking doors
Locking doors
1. Close all windows.

2. Remove the key from the ignition switch.

3. Close the hood, trunk lid, and all doors.

4. Press the button on the keyfob. All the doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked.

● When the doors locked, the hazard lights flash twice button is pressed with all doors locked, the hazard lights flash twice and the horn beeps once as a reminder that the doors are already locked.

● If a door is open and you press the button, the doors will lock but the horn will button, the doors will lock but the horn will not beep and the hazard lights will not flash.

The horn may or may not beep once. Refer to “Silencing the horn beep feature” in this section for details.

    See also:

    Heated seat (if so equipped)
    Heated seat (if so equipped) The front seats are warmed by built-in heaters. 1. Start the engine. 2. Push the low or high position of the switch, as desired, depending on the temperature. The ...

    Control buttons
    The control buttons for the Bluetooth Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the   button to initiate a VR session or answer an incoming call. Y ...

    Preventing the Intelligent Key from being left in the vehicle
    If you lock all doors using the power door lock switch with the Intelligent Key in the vehicle, all of the doors unlock immediately and the buzzer will warn you when the door is closed. ...