Normal operation
The ABS operates at speeds above 3 - 6 MPH (5 - 10 km/h). The speed varies according to road conditions.
When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly. You may feel a pulsation in the brake pedal and hear a noise from under the hood or feel a vibration from the actuator when it is operating. This is normal and indicates that the ABS is operating properly.
However, the pulsation may indicate that road conditions are hazardous and extra care is required while driving.
See also:
If your vehicle is stolen
If your vehicle is stolen, you should change the
codes of any non-rolling code device that has
been programmed into HomeLink®. Consult the
Owner’s Manual of each device or call the
manufact ...
Battery saver system
- When the headlight switch is in the
or
position while the ignition switch is in
the ON position, the lights will automatically
turn off 5 minutes after the ignition switch
has been turned ...
Audio main operation
Place the ignition switch in the ACC or ON
position. Then, push the button repeatedly
to switch to the iPod® mode.
If the system has been turned off while the iPod®
was playing, pushing the O ...