Starting and driving

See also:

Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Push the button on t ...

Battery saver system
- When the headlight switch is in the or position while the ignition switch is in the ON position, the lights will automatically turn off 5 minutes after the ignition switch has been turned ...

Locking doors
1. Turn the ignition switch to the LOCK position.1 2. Carry the Intelligent Key with you. 3. Close all the doors.2 4. Push the LOCK button 1 on the Intelligent Key. 5. All the doors and the ...