Aluminum alloy wheels
Wash the wheels regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. If not removed, road salt can discolor the wheels.
Follow the directions below to avoid staining or discoloring the wheels.
● Do not use a cleaner that uses strong acid or alkali contents to clean the wheels.
● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature.
● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied.
See also:
Booster seat installation
CAUTION
Do not use the lap/shoulder belt in the
Automatic Locking Retractor mode when
using a booster seat with the seat belts.
Refer to all Warnings and Cautions in the “Child
Safety”, “Ch ...
Top tether anchor point locations
The child restraint top tether strap must be used
when installing the child restraint with the LATCH
lower anchor attachments or seat belts. See “Installing
top tether strap” later in this se ...
Reprogramming a single HomeLink button
To reprogram a HomeLink Universal Transceiver
button, complete the following.
1. Press and hold the desired HomeLink button.
Do not release the button until step 4
has been completed.
2. When the ...