To protect your vehicle from corrosion

● Wash and wax your vehicle often to keep the vehicle clean.

● Always check for minor damage to the paint and repair it as soon as possible.

● Keep drain holes at the bottom of the doors open to avoid water accumulation.

● Check the underbody for accumulation of sand, dirt or salt. If present, wash with water as soon as possible.

● NEVER remove dirt, sand or other debris

● NEVER remove dirt, sand or other debris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom.

● Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them.

Chemicals used for road surface de-icing are extremely corrosive. They accelerate corrosion and deterioration of underbody components such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders.

In winter, the underbody must be cleaned periodically.

For additional protection against rust and corrosion, which may be required in some areas, consult a NISSAN dealer.

    See also:

    How to arm the vehicle security system
    1. Close all windows. (The system can be armed even if the windows are open.) 2. Remove the Intelligent Key from the vehicle. 3. Close all doors, hood and trunk. Lock all doors. The doors can be l ...

    Vehicle identification number (VIN) plate
    The vehicle identification number (VIN) plate is attached as shown. This number is the identification for your vehicle and is used in the vehicle registration. ...

    Maximum Gross Vehicle Weight (GVW)/Maximum Gross Axle Weight (GAW)
    The GVW of the towing vehicle must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the F.M.V.S.S./C.M.V.S.S. certification label. The GVW equals the combined weight of the unloade ...