Installing front license plate
Use the following steps to mount the front license plate.
1 Slide the metal mounting clips onto the license plate holder as indicated.
2 Attach the license plate bracket on the plastic finisher at the location mark (small dimple) using the two 6mm screws provided.
See also:
Cargo net (if so equipped)
WARNING:
- Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. In a sudden stop or collision,
unsecured cargo could cause personal
injury.
- Be sure ...
Troubleshooting guide
The system should respond correctly to all voice
commands without difficulty. If problems are encountered,
try the following solutions.
Where the solutions are listed by number, try
each soluti ...
Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with All-Wheel Drive (AWD)
should never be tested using a two wheel
dynamometer (such as the dynamometers used
by some states for emissions testing), or similar
equipment. M ...