Seat belt maintenance

- To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets.

Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry.

- If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth.

- Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.

    See also:

    Locking with power door lock switch
    To lock all the doors without a key, push the door lock switch (drivers or front passengers side) to the lock position (1) . When locking the door this way, be certain not to leave the key ins ...

    Safety
    Two notable safety improvements for 2010 include side curtain airbags as standard equipment on all four- and six-cylinder models, and a standard electronic stability system on all V-6 models. The ...

    NISSAN Vehicle Immobilizer System keys
    You can only drive your vehicle using the master keys which are registered to the NISSAN Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key hea ...