Hitch ball
Choose a hitch ball of the proper size and
weight rating for your trailer:
- The required hitch ball size is stamped on
most trailer couplers. Most hitch balls also
have the size printed on top of the ball.
- Choose the proper class hitch ball based on the trailer weight.
- The diameter of the threaded shank of the hitch ball must be matched to the ball mount hole diameter. The hitch ball shank should be no more than 1/16´´ smaller than the hole in the ball mount.
- The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut.
See also:
Turn signal switch
1 Turn signal
Move the lever up or down to signal the turning
direction. When the turn is completed, the turn
signals cancel automatically.
2 Lane change signal
To indicate a lane change, mov ...
Rear-facing child restraint installation using the seat belts
● The three-point seat belt with Automatic
Locking Retractor (ALR) must be
used when installing a child restraint.
Failure to use the ALR mode will result
in the child restraint not b ...
Locking with power door lock switch
To lock all the doors without a key, push the door
lock switch (drivers or front passengers side) to
the lock position (1) . When locking the door this
way, be certain not to leave the key ins ...