Latch lower anchor location
Latch lower anchor location
The Latch lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the Latch lower anchors.
Latch webbing-mounted attachment
Installing child restraint Latch lower anchor attachments Latch compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to secure the child restraint. Check your child restraint for a label stating that it is compatible with Latch. This information may also be in the instructions provided by the child restraint manufacturer.
Latch rigid-mounted attachment
The child restraint top tether strap must be used when installing the child restraint with the Latch lower anchor attachments or seat belts. See Top tether anchor for installation instructions.
When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint.
Top tether anchor
WARNING:
Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap.
Cargo that is not properly secured or cargo that contacts the top tether strap may damage it during a collision. A child could be seriously injured or killed in a collision if the top tether strap is damaged.
Top tether anchor point locations
Anchor pointss are located on the rear parcel shelf.
See also:
Automatic anti-glare rearview mirror
(if so equipped)
The inside mirror is designed so that it automatically
dims during night time conditions and according
to the intensity of the headlights of the
vehicle following you. The automatic anti-glare
fea ...
Rear-facing child restraint installation using the seat belts
Rear-facing child restraint installation using the seat belts
WARNING:
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure ...
Releasing the trunk lid
Press the button for longer than
0.5 seconds
to open the trunk lid. The trunk release
button will not operate when the ignition switch is
in the ON position or when the trunk cancel
switch is ...