Vehicle Dynamic Control (VDC) OFF switch

Nissan Maxima / Nissan Maxima Owners Manual / Instruments and controls / Vehicle Dynamic Control (VDC) OFF switch

The vehicle should be driven with the Vehicle

The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions.

If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off.

To turn off the VDC system, push the VDC OFF switch. The come on.indicator will come on.

Push the VDC OFF switch again or restart the engine to turn on the system. See Vehicle Dynamic Control (VDC) system in the Starting and driving section.

    See also:

    ON position
    When the switch is in the ON position 1 , the ceiling light will illuminate. ...

    Installing front license plate
    Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. - License plate bracket - J-nut 6 ...

    Sway control device
    Sudden maneuvers, wind gusts, and buffeting caused by other vehicles can affect trailer handling. Sway control devices may be used to help control these affects. If you choose to use one, contact ...