Installing top tether strap
First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. Flip up the anchor cover 1 from the anchor
point which is located directly behind the
child seat.
2. Position the top tether strap over the top of
the seatback 2 .>
3. Secure the tether strap to the tether anchor
point on the rear parcel shelf 3 .>
4. Refer to the appropriate child restraint installation
procedure steps in this section
before tightening the tether strap.
To remove or reinstall the tether anchor covers, see “Upper tether anchor/key cylinder covers” in the “Maintenance and do-it-yourself” section of this manual.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
See also:
Explanation of general maintenance items
Additional information on the following
items with * is found later in this section.
Outside the vehicle
The maintenance items listed here should be
performed from time to time, unless otherwise ...
Radio
With the ignition placed in the ACC or ON position,
press the PWR (power)/VOL (volume) knob
to turn the radio on. If you listen to the radio with
the engine not running, the ignition should be
pla ...
Fuel gauge
Fuel gauge
NOTE:
The ignition switch must be placed in the
ON position for the gauge to give a reading.
The gauge indicates the approximate fuel level
in the tank.
The gauge may move slig ...