Controls
Fan control dial
The fan control dial turns the fan on and off, and controls fan speed.
Air flow control buttons
The air flow control buttons allow you to select the air flow outlets.
MAX
A/C
— Air flows from center and side vents with maximum cooling.
— Air flows from center and
side
vents.
— Air flows from center and side
vents and foot outlets.
— Air flows mainly from foot
outlets.
— Air flows from defroster
outlets
and foot outlets.
— Air flows mainly from
defroster
outlets.
Temperature control dial
The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right.
Air recirculation button
On position (Indicator light on): Interior air is recirculated inside the vehicle.
Press the button to the on
position when:
● driving on a dusty road.
● to prevent traffic fumes from entering passenger compartment.
● for maximum cooling when using the air conditioner.
Off position (Indicator light off):
Outside air is drawn into the passenger compartment and distributed through the selected outlet.
Use the off position for normal heater or air conditioner operation.
Air conditioner button
The button is provided only on vehicles equipped with an air conditioner.
Start the engine, turn the fan control dial to the
desired position and push the
button to
turn on the air conditioner. The indicator light
comes on when the air conditioner is operating.
To turn off the air conditioner, push the
button again.
The air conditioner cooling function operates only when the engine is running.
Rear window defroster switch For more information about the rear window defroster switch, see “Rear window and outside mirror defroster switch” in the “Instruments and controls” section of this manual.
See also:
Antenna
Antenna
To remove the antenna, hold the bottom of the
antenna and turn it counterclockwise.
To install the antenna, turn the antenna clockwise
and tighten.
- To avoid damaging or deformin ...
Measurement of weights
Secure loose items to prevent weight
shifts that could affect the balance of your
vehicle. When the vehicle is loaded, drive
to a scale and weigh the front and the rear
wheels separately to de ...
Vehicle identification number (VIN) plate
The vehicle identification number (VIN) plate is
attached as shown. This number is the identification
for your vehicle and is used in the vehicle
registration. ...