Air conditioner operation
Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation.
The air conditioner cooling function operates only when the engine is running.
Cooling
This mode is used to cool and dehumidify the air.
1. Press the 
button to the OFF
position.
2. Press the 
air flow control
button.
3. Turn the fan control dial to the desired position.
4. Push the button. the indicator light
comes on.
5. Turn the temperature control dial to the desired
position.
● For quick cooling when the outside temperature
is high, push the 
button to
the ON position. Be sure to return the
to the OFF position for normal cooling. MAX
A/C may be used for quick cooling.
See also:
Opener operation
WARNING:
- Do not drive with the trunk lid open. This
could allow dangerous exhaust gases
to be drawn into the vehicle. See Exhaust
gas in the Starting and driving
section of this manual.
...
Moisture
Accumulation of sand, dirt and water on the
vehicle body underside can accelerate corrosion.
Wet floor coverings will not dry completely
inside the vehicle, and should be removed for
drying to ...
Too High to Handle
The numbers quantify the Spec V's main disappointments, but there was
something fundamentally wrong with the driving experience, and after days and
miles I finally concluded that the car is just t ...