Installing covers to rear parcel shelf
CAUTION
Make sure that the hinge is completely aligned with the pin. If the pin is forced into position, it may break.
Install the top tether anchor cover or key cylinder cover as follows:
1. With the pin on one end kept free of its hinge 1 , align the pin of the other end and slide it into the hinge 2 .
2. With the first pin in position 2 , align the second pin with its hinge slot 1 and push down on the cover to completely engage it. A snap sound will be heard.
3. Close the cover.
See also:
How It Moves
Our all-wheel-drive tester had enough power to reach cruising speeds with
little struggle, even with three adult occupants on board. On SV and SL models,
the Integrated Control system's three mode ...
Automatic operation
To fully open a window equipped with automatic
operation, press the window switch down (only
driver’s side shown) to the second detent and
release it; it need not be held. The window automatica ...
Console box
Console box
To open the console boxes, push up the knob
A and pull up the lid.
To close, push the lid down until latched.
To remove the inner box (if so equipped) for
cleaning or storing a la ...