Operating tips

● When the shift selector is shifted to R (Reverse), the monitor screen automatically changes to the RearView Monitor mode.

However, the radio can be heard.

● It may take some time until the RearView Monitor is displayed after the shift selector has been shifted to R (Reverse). Objects may be distorted momentarily until the Rear- View Monitor screen is displayed completely.

When the shift selector is returned to a position other than R (Reverse), it may take some time until the screen changes. Objects on the screen may be distorted until they are completely displayed.

● When the temperature is extremely high or low, the screen may not clearly display objects.

This is not a malfunction.

● When strong light directly enters the camera, objects may not be displayed clearly.

● Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction.

● The screen may flicker under fluorescent light. This is not a malfunction.

● The colors of objects on the RearView Monitor may differ somewhat from those of the actual object.

● When the contrast of objects is low at night, pressing the setting control knob or SETUP button may not change the brightness.

● Objects on the monitor may not be clear in a dark place or at night.

● If dirt, rain or snow attaches to the camera, the RearView Monitor may not display objects.

Clean the camera.

● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration.

To clean the camera, wipe with a cloth dampened with a diluted mild cleaning agent and then wipe with a dry cloth.

● Do not damage the camera as the monitor screen may be adversely affected.

● Do not use body wax on the camera window.

If body wax does get on the camera window, wipe off the wax with a clean cloth dampened with mild detergent diluted with water.

    See also:

    Interior
    Seven-passenger seating includes split, folding second- and third-row seats. The front passenger seat also folds. The second-row seat is split 40/20/40 and has a one-touch release lever for third- ...

    Tire labeling
    Example Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of ...

    DOOR position
    When the switch is in the DOOR position 2 , the ceiling light will illuminate under the following conditions: - ignition switch is turned to the LOCK position — remain on for about 15 seco ...