Vehicle Dynamic Control (VDC) system (if so equipped)
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions.
● Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle.
● Controls brake pressure and engine output to reduce drive wheel slip based on vehicle speed (traction control function).
● Controls brake pressure at individual wheels
and engine output to help the driver maintain
control of the vehicle in the following conditions:
– understeer (vehicle tends to not follow
the steered path despite increased steering
input)
– oversteer (vehicle tends to spin due to
certain road or driving conditions)
The VDC system can help the driver to maintain control of the vehicle, but it can not prevent loss of vehicle control in all driving situations.
When the VDC system operates, the indicator
in the instrument panel flashes so note the
following.
● The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path.
● You may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and indicates that the VDC system is working properly.
● Adjust your speed and driving to the road conditions.
See “Slip indicator light” and ”Vehicle Dynamic Control (VDC) off indicator light” in the ”Instruments and controls” section.
If a malfunction occurs in the system, the
and
indicator lights come on in the instrument
panel. The VDC system automatically turns
off when these indicator lights are on.
The VDC OFF switch is used to turn off the VDC
system. The
indicator illuminates to indicate
the VDC system is off.
When the VDC switch is used to turn off the
system, the VDC system still operates to prevent
one drive wheel from slipping by transferring
power to a non slipping drive wheel. The
indicator flashes if this occurs. All other VDC
functions are off and the
indicator will not
flash.
The VDC system is automatically reset to on when the ignition switch is placed in the OFF position then back to the ON position.
The computer has a built in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in reverse at a slow speed. When the self-test occurs, you may hear a clunk noise and/or feel a pulsation in the brake pedal. This is normal and is not an indication of a malfunction.
● The VDC system is designed to help the driver maintain stability but does not prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques.
Reduce vehicle speed and be especially careful when driving and cornering on slippery surfaces and always drive carefully.
● Do not modify the vehicle’s suspension.
If suspension parts such as shock absorbers,
struts, springs, stabilizer bars,
bushings and wheels are not NISSAN
recommended for your vehicle or are
extremely deteriorated, the VDC system
may not operate properly. This could
adversely affect vehicle handling performance,
and the
indicator may
flash or both the
and
indicator
lights may illuminate.
● If brake related parts such as brake
pads, rotors and calipers are not
NISSAN recommended or are extremely
deteriorated, the VDC system may not
operate properly and both the
and the
indicator lights may
illuminate.
● If engine control related parts are not
NISSAN recommended or are extremely
deteriorated, both the
and
indicator lights may illuminate.
● When driving on extremely inclined surfaces
such as higher banked corners,
the VDC system may not operate properly
and the
indicator may flash or
both the
and
indicator
lights may illuminate. Do not drive on
these types of roads.
● When driving on an unstable surface
such as a turntable, ferry, elevator or
ramp, the
indicator may flash or
both the
and
indicator
lights may illuminate. This is not a malfunction.
Restart the engine after driving onto a stable surface.
● If wheels or tires other than the NISSAN
recommended ones are used, the VDC
system may not operate properly and
the
indicator may flash or both
the
and
indicator lights may
illuminate.
● The VDC system is not a substitute for winter tires or tire chains on a snow covered road.
See also:
Trailer towing tips
In order to gain skill and an understanding of the
vehicle’s behavior, you should practice turning,
stopping and backing up in an area which is free
from traffic. Steering stability and braking p ...
Changing engine oil
MR20DE engine
A Oil filler cap
B Oil drain plug
C Oil filter
QR25DE engine
A Oil filler cap
B Oil drain plug
C Oil filter
1. Park the vehicle on a level surface and apply
the parking ...
Blocking wheels
Blocking wheels
Place suitable blocks 1 at both the front and
back of the wheel diagonally opposite the flat tire
2 to prevent the vehicle from moving when it is
jacked up.
Be sure to bl ...