Unlocking doors
1. Push the door handle request switch A or the lift gate request switch B while carrying the Intelligent Key with you.
2. The hazard indicator flashes once and outside chime sounds once. The corresponding door or the lift gate will unlock.
3. Push the request switch again within 5 seconds.
4. The hazard indicator flashes once and outside chime sounds once again. All the doors and the lift gate will unlock.
All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked.
- Opening any doors.
- Pushing the ignition switch.
- Inserting the mechanical key into the ignition switch.
During this 1-minute time period, if the UNLOCK
button on the Intelligent Key is
pushed, all
doors will be locked automatically after another
1 minute.
See also:
Heater operation
Heating:
This mode is used to direct heated air to the foot
outlets.
1. Push the air recirculation button
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control ...
Locking doors
Locking doors
1. Place the ignition switch in the LOCK position.
(Remove the key if any key is in the
ignition switch.)
2. Close all doors.
3. Push any door handle request switch 1
while ca ...
Getting the spare tire and tools
1. Open the lift gate.
2. Remove the cargo cover (if so equipped).
(See “Cargo cover” in the “2. Instruments
and controls” section.)
3. Lift up the luggage floor board 1 (foldable
or ...