Draining of coolant water
If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle.
For details, see “Engine cooling system” in the “8. Maintenance and do-it-yourself” section.
See also:
Push-button ignition switch positions
LOCK (Normal parking position):
The ignition switch can only be locked in this
position.
The ignition switch will be unlocked when it is
pushed to the ACC position while carrying the
Intelligent ...
Windshield wiper blades. Replacing
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push the release tab, then move the wiper
blade down the wiper arm to remove.
3. Remove the wiper bla ...
Drive belt
1. Power steering fluid pump.
2. Generator.
3. Air conditioner compressor.
4. Crankshaft pulley.
WARNING:
Be sure the ignition switch is in the OFF or
LOCK position before servicing drive bel ...
