See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

FM/AM radio operation
FM/AM band select: Pressing the AM·FM button will change the band as follows: AM > FM1 > FM2 > AM When the AM·FM button is pressed while the ignition switch is in the ACC or ON position, the ...

Drive belt
1. Power steering fluid pump. 2. Generator. 3. Air conditioner compressor. 4. Crankshaft pulley. WARNING: Be sure the ignition switch is in the OFF or LOCK position before servicing drive bel ...