Bluetooth streaming audio (if so equipped)

● Some Bluetooth audio devices may not be recognized by the in-vehicle audio system.
● It is necessary to set up the wireless connection between a compatible Bluetooth audio device and the in-vehicle Bluetooth module before using the Bluetooth audio.
● Operating procedure of the Bluetooth audio will vary depending on the devices. Make sure how to operate your audio device before using it with this system.
● The Bluetooth audio may be stopped under the following conditions:
● Receiving a call on the Hands-Free Phone System.
● Checking the connection to the handsfree phone.
● Do not place the Bluetooth audio device in an area surrounded by metal or far away from the in-vehicle Bluetooth module to prevent tone quality degradation and wireless connection disruption.
● While an audio device is connected through the Bluetooth wireless connection, the battery power of the device may discharge quicker than usual.
● This system supports the Bluetooth Audio Distribution Profile (A2DP, AVRCP).

    See also:

    Connecting procedure
    NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Push the button on t ...

    Suggested maximum speed in each gear
    Downshift to a lower gear if the engine is not running smoothly, or if you need to accelerate. Do not exceed the maximum suggested speed (shown below) in any gear. For level road driving, use t ...

    Fastening the seat belts
    1. Adjust the seat. See “Seats” earlier in this section. 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. & ...