See also:

Programming HomeLink
1. To begin, press and hold the two outer HomeLink buttons (to clear the memory) until the indicator light 1 blinks (after 20 seconds). Release both buttons. 2. Position the end of the hand-held ...

Dehumidified heating
This mode is used to heat and dehumidify the air. 1. Push the button to the off position. 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired positio ...

Warning for low battery power
When the Intelligent Key battery is low, the Intelligent Key system warning light ( ) will blink green for about 30 seconds after the ignition switch is placed in the ON position. This warning ...