Locking doors
Locking doors
1. Place the ignition switch in the LOCK position.
2. Close all doors.
3. Press the 
button on the
Intelligent
Key.
4. The hazard warning lights flash twice and the horn beeps once.
5. All doors will be locked.
After locking the doors using the Intelligent Key, be sure that the doors have been securely locked by operating the door handles.
See also:
All-Wheel Drive (AWD) (if so equipped)
- For AWD equipped vehicles, do not
attempt to raise two wheels off the
ground and shift the transmission to
any drive or reverse position with
the engine running. Doing so may
result in ...
Using the system
Depress the brake pedal and hold it down. Depress
the brake pedal with firm steady pressure,
but do not pump the brakes. The ABS will operate
to prevent the wheels from locking up. Steer
the v ...
Emergency engine shut off
To shut off the engine in an emergency situation
while driving perform the following procedure:
– Rapidly push the push-button ignition switch 3
consecutive times, or
– Push and hold the push- ...