Audible reminder and warning when the engine stops
When the P position selecting warning light
( 
) in the
instrument panel blinks in red.
● Make sure the shift selector is in the P (Park) position.
When the chime sounds intermittently.
● Make sure the shift selector is in the P (Park) position and the ignition switch is placed in the LOCK position.
If the chime sounds continuously when the driver’s door is opened, check the following.
● The shift selector is placed in the P (Park) position and the ignition switch is placed in the LOCK position.
● The mechanical key is not inserted into the ignition switch.
● The warning chime may stop when one of the following is performed.
– Returning the ignition switch to the LOCK position.
– Removing the mechanical key.
– Closing the doors.
See also:
Releasing the trunk lid (if so equipped)
Releasing the trunk lid (if so equipped)
Press the button on the keyfob for longer
than 0.5 seconds to open the trunk lid. The trunk
release button on the keyfob will not operate
when the ig ...
Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc.,
use the following procedure:
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is ...
Locking with inside lock knob
Locking with inside lock knob
To lock the door without the key, move the inside
lock knob to the lock position 1 then close the
door.
To unlock, move the inside lock knob to the
unlock posit ...