Manual transmission (if so equipped)
The ignition switch includes a device that helps prevent accidental removal of the key while driving.
The key can only be removed when the ignition switch is in the LOCK position.
On manual transmission models, to turn the ignition switch to the LOCKposition from theACCor ON position, place the ignition switch in the OFF position, push the key in, then place the ignition switch in LOCK position.
See also:
How to use the remote keyless entry
function
The remote keyless entry function can operate all
door locks using the remote keyless function of
the Intelligent Key. The remote keyless function
can operate at a distance of 33 ft (10 m) away
fr ...
Vehicle Dynamic Control (VDC) off switch
The vehicle should be driven with the Vehicle
Dynamic Control (VDC) system on for most driving
conditions.
If the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to red ...
Backing up behind a projecting object
The position C is shown farther than the position
B in the display. However, the position C is
actually at the same distance as the position A .
The vehicle may hit the object when backing up to
...