Break-in schedule
During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance.
● Avoid driving for long periods at constant speed, either fast or slow, and do not run the engine over 4,000 rpm.
● Do not accelerate at full throttle in any gear.
● Avoid quick starts.
● Avoid hard braking as much as possible.
● Do not tow a trailer for the first 500 miles (800 km). Your engine, axle or other parts could be damaged.
See also:
Audible reminder and warning when locking the
doors
When the chime or buzzer sounds from inside
and outside the vehicle, check for the following.
● The ignition switch is placed in the LOCK
position.
● The Intelligent Key is not left ...
NISSAN Voice Recognition Standard Mode
The Standard Mode enables control of navigation,
phone and vehicle information. With this
setting active, commands that are available are
always shown on the display and announced by
the system. ...
Vehicle Dynamic Control (VDC) off switch
The vehicle should be driven with the Vehicle
Dynamic Control (VDC) system on for most driving
conditions.
If the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to red ...