Setting hazard indicator and horn mode

This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.

In hazard indicator and horn mode, when the LOCK hazard button 1 is pushed, the hazard indicator flashes twice and the horn chirps once.

When the UNLOCK pushed, button 2 is pushed, the hazard indicator flashes once.

If the horn chirp is not necessary, you can switch to hazard indicator only mode by following the switching procedure.

In hazard indicator only mode, when the LOCK indicator button is pushed, the hazard indicator flashes twice. When the UNLOCK button is button is pushed, neither the hazard indicator nor the horn operates.

Switching procedure:

Switching procedure:

To switch the hazard indicator and horn operation, push the LOCK 1 and UNLOCK 2 buttons on the keyfob simultaneously for more than 2 seconds.

- When the hazard indicator mode is set, the hazard indicator flashes 3 times.

- When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.

Intelligent Key system (if so equipped)

    See also:

    Tire and loading information label
    The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. ...

    Installing child restraint LATCH lower anchor attachments
    LATCH webbing-mounted attachment LATCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to anchors located at certain seating positions in yo ...

    OFF position
    When the switch is in the OFF position 3 , the ceiling light will not illuminate, regardless of the condition. ...