Operations after activation

- When the rear view is displayed on the left side on the screen (B or C ), the view on the right side switches between the bird’seye view B and the front-side view C each time the CAMERA button is pushed (3 ).

- When the front view/bird’s-eye view D is displayed on the screen, pushing the CAMERA button (9 ) will switch the view on the right side to the front-side view E .

When the CAMERA button is pushed again (10 ), the screen which was displayed before the Around View Monitor was activated A is displayed.

- The view on the driver’s side switches to the rear view (B or C ) when the selector lever is shifted into the “R” (Reverse) position (5 or 7 ).

The view will switch back to the front view (D or E ) when the selector lever is shifted out of the “R” (Reverse) position (4 or 6 ).

    See also:

    Installing front license plate
    Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

    2011 Nissan Juke review
    It seems fitting that Nissan, the automaker behind everything from the toylike Cube to the shield-your-eyes Infiniti QX56, is also responsible for the Juke, a tiny crossover with a turbocharged en ...

    Rear-facing child restraint installation using latch
    Refer to all Warnings and Cautions in the Child Safety and Child Restraint sections before installing a child restraint. Follow these steps to install a rear-facing child restraint using the La ...