Manual command selection
Commands can be selected manually. While the
commands are displayed on the audio screen,
select a command by operating the audio tuning
switch, and then push the 
switch.
Once a
command is manually selected, the voice
command function is cancelled. To return to
voice command mode, push the 
switch
to
cancel the current operation, and then perform
the first procedure of voice command.
See also:
Jump starting
To start your engine with a booster battery, the
instructions and precautions below must be
followed.
- If done incorrectly, jump starting
can lead to a battery explosion,
resulting in se ...
Interface system for iPod® operation
Interface system for iPod® operation
Connecting iPod®:
The iPod® outlet connector is located in the
center console. Connect the cable 1 as
illustrated, and then connect the other end of
t ...
Continuously Variable
Transmission (CVT) check
warning light (if so equipped)
When the ignition switch is placed in the ON
position, the light comes on for about 2 seconds.
If the light comes on at any other time, it may
indicate the CVT system is not functioning properly. ...