Getting the spare tire and tools
1. Open the lift gate.
2. Remove the cargo cover (if so equipped).
(See “Cargo cover” in the “2. Instruments and controls” section.) 3. Lift up the luggage floor board 1 (foldable or separate type).
4. Remove the lids of the luggage side boxes.
5. Remove the luggage floor box (Type A or B) by turning the clips counterclockwise.
Jacking tools
6. Remove the jacking tools and the spare tire.
Jacking tools: Remove the jack by turning it, then remove the other tools.
Spare tire
Type A:
Rotate the clamp until it can be removed then remove the spare tire.
Type B:
Rotate the clamp until it can be removed then relocate the subwoofer to a side of the cargo area and remove the spare tire.
See also:
Exterior front
1. Engine hood
2. Windshield wiper and washer switch
3. Windshield
4. Moonroof (if so equipped)
5. Power windows (if so equipped)
6. Door locks, keyfob (if so equipped),
NISSAN Intellige ...
All-Wheel Drive (AWD) lock switch operations
The AWD LOCK switch located on the lower
side of the instrument panel. This switch is used
to select the AUTO or LOCK mode depending
on the driving conditions.
Each time you push the lower pa ...
Tire Pressure Monitoring System (TPMS) (if so equipped)
This vehicle is equipped with the Tire Pressure
Monitoring System (TPMS). It monitors tire pressure
of all tires except the spare. When the low
tire pressure warning light is lit, and the CHECK ...