Hazard warning flasher switch

Push the switch on to warn other drivers when

Push the switch on to warn other drivers when you must stop or park under emergency conditions.

All turn signal lights flash.

WARNING:

- If stopping for an emergency, be sure to move the vehicle well off the road.

- Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.

- Turn signals do not work when the hazard warning flasher lights are on.

The flashers will operate with the ignition switch placed in any position.

Some state laws may prohibit the use of the hazard warning flasher switch while driving.

    See also:

    Checking tire pressure
    1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing ...

    Seat belts with pretensioners (Front seats)
    WARNING ● The pretensioners cannot be reused after activation. They must be replaced together with the retractor and buckle as a unit. ● If the vehicle becomes involved in a collisio ...

    Control buttons
    The control buttons for the Bluetooth Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the   button to initiate a VR session or answer an incoming call. Y ...