Compass display (if so equipped)
This unit measures terrestrial magnetism and indicates
the direction of the vehicle’s heading.
With the ignition switch placed in the ON position,
press the 
button as described in
the
chart below to activate various features of the
automatic anti-glare rearview mirror.
For information about the automatic anti-glare feature, refer to “Automatic anti-glare rearview mirror” in the “Pre-driving checks and adjustments” section.
Press the button for about 1
second when
the ignition switch is placed in the ON position to
toggle the compass display 1 on or off. The
display will indicate the direction of the vehicle’s
heading.
N: North
E: East
S: South
W: West
If the display reads “C”, calibrate the compass by driving the vehicle in three complete circles at less than 5 MPH (8 km/h).
You can also calibrate the compass by driving your vehicle on your everyday route. The compass will be calibrated once it has tracked three complete circles.
See also:
Sliding the moonroof
To fully open the moonroof, push the switch
toward 1 .
To fully close the moonroof, push the switch
toward 2 .
To open or close the moonroof part way, push the
switch in any direction while the ...
Trailer hitch
Choose a proper hitch for your vehicle and trailer.
Make sure the trailer hitch is securely attached to
the vehicle, to help avoid personal injury or property
damage due to sway caused by crosswi ...
Opening and closing windows (if so
equipped)
The driver’s door key operation allows you to
open and close windows equipped with automatic
operation at the same time.
● To open the windows, turn the driver’s door
key toward the rear ...