Hazard warning flasher switch

Push the switch on to warn other drivers when

Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights flash.

WARNING

● If stopping for an emergency, be sure to move the vehicle well off the road.
● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.
● Turn signals do not work when the hazard warning flasher lights are on.

The flashers will operate with the ignition switch placed in any position.

Some state laws may prohibit the use of the hazard warning flasher switch while driving.

    See also:

    Front-side view
    Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line 1 shows the front part of the v ...

    Vehicle Dynamic Control (VDC) system (if so equipped)
    The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following funct ...

    Windshield wiper blades. Replacing
    Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2. Push the release tab, then move the wiper blade down the wiper arm to remove. 3. Remove the wiper bla ...