Vehicle Dynamic Control (VDC) off switch

Nissan Altima / Nissan Altima Owners Manual / Instruments and controls / Vehicle Dynamic Control (VDC) off switch

The vehicle should be driven with the Vehicle

The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions.

If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off.

To turn off the VDC system, push the VDC OFF switch. The Push the VDC OFF switch again or restart the indicator will come on.

Push the VDC OFF switch again or restart the engine to turn on the system. See “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section.

    See also:

    Tire Pressure Monitoring System (TPMS) (if so equipped)
    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire ...

    Lower half
    Pull up on the passenger’s side latch to open the lower half of the console box. A power outlet is located inside the console box. The mat may be removed for cleaning. ...

    Locking with inside lock knob
    Locking with inside lock knob To lock the door without the key, move the inside lock knob to the lock position 1 then close the door. To unlock, move the inside lock knob to the unlock posit ...