Auto-reverse function
If the control unit detects something caught in the window as it is closing, the window will be immediately lowered.
The auto-reverse function can be activated when the window is closed by automatic operation when the ignition switch is placed in the ON position or for 45 seconds after the ignition switch is placed in the OFF position. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window occurs.
WARNING
There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.
See also:
Push starting
CAUTION
● Do not push start this vehicle. The
three-way catalyst may be damaged.
● Continuously Variable Transmission
(CVT) models cannot be push-started or
tow-started. Attempting to ...
Exterior
The Maxima was redesigned for 2009, and I noticed quite a few design elements
that appear to have been pulled from the Infiniti line. From the outside, the
hood looks bowed toward the center and f ...
Upper tether anchor/key cylinder covers
CAUTION
Never force the covers into place because
the hinge pins can be damaged. Follow
the removal and installation instructions
to prevent inoperability of the covers. ...
