Locking doors

1. Place the ignition switch in the LOCK position.

1. Place the ignition switch in the LOCK position.
2. Close all doors.
3. Press the Intelligent button on the Intelligent Key.
4. The hazard warning lights flash twice and the horn beeps once.
5. All doors will be locked.

CAUTION

After locking the doors using the Intelligent Key, be sure that the doors have been securely locked by operating the door handles.

    See also:

    Passenger compartment
    Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment d ...

    Manual Control (if so equipped)
    While using the voice recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. The manual control mode does not allow ...

    Blocking wheels
    Place suitable blocks 1 at both the front and back of the wheel diagonally opposite the flat tire 2 to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel a ...