Type A and Type B
Type A-Without compass
Type B-With compass
The indicator light 2 will illuminate when the automatic anti-glare feature is operating.
To turn off the automatic anti-glare feature, press:
● the O button for inside mirrors without compass.
● the 
button for inside mirrors
with
compass.
The indicator light will turn off.
To turn on the automatic anti-glare feature again, press:
● the 
button for inside mirrors
without
compass.
● the 
button for inside mirrors
with
compass.
The indicator light will turn on. For information on HomeLink Universal Transceiver operation, see the “HomeLink Universal Transceiver” in the “Instruments and controls” section of this manual.
For information on the compass display (if so equipped), see “Compass display” in the “Instruments and controls” section of this manual.
See also:
Connecting procedure
NOTE:
The connecting procedure must be performed
when the vehicle is stationary. If
the vehicle starts moving during the procedure,
the procedure will be cancelled.
1. Push the button on t ...
How to see each view
- The distance guide line and the
vehicle width line should be used
as a reference only when the vehicle
is on a paved, level surface. The
distance viewed on the monitor is
for reference ...
Sway control device
Sudden maneuvers, wind gusts, and buffeting
caused by other vehicles can affect trailer handling.
Sway control devices may be used to help
control these affects. If you choose to use one,
contact ...