Engine compartment

CAUTION
Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire.
If any electrical equipment does not come on, check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Open the engine hood.
3. Remove the fuse box cover by pushing the
tab and lifting the cover up.
4. Remove the fuse with the fuse puller. The
fuse puller is located in the center of the fuse
block in the passenger compartment.

5. If the fuse is open A , replace it with a new fuse B .
6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer.
Fusible links
If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only Genuine NISSAN parts.
See also:
Locking doors
Locking doors
1. Place the ignition switch in the LOCK position.
(Remove the key if any key is in the
ignition switch.)
2. Close all doors.
3. Push any door handle request switch 1
while ca ...
Trailer lights
When splicing into the vehicle electrical
system, a commercially available powertype
module/converter must be used to
provide power for all trailer lighting. This
unit uses the vehicle bat ...
Rogue in the Market
Some shoppers will be put off by the Rogue's poor sight lines, but I suspect
the majority will respond to the crossover with a collective shrug. When similar
money can buy a handsome interior, a v ...
