Display settings

Select the “Display” key. On the screen above,

Select the “Display” key. On the screen above, select the “Display Adjustment” key. The Display Adjustment screen will appear.

Brightness/contrast:

Brightness/contrast:

Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the display background. Touch the “+” or “-” key to adjust the brightness to darker or brighter and the contrast to lower or higher.

The new settings are automatically saved when you exit the setting screen by selecting the “Back” key or any other mode button.

Display off:

Display off:

Select the “Display ON” key. The indicator of the “Display ON” turns off and the message above will be displayed briefly. When the audio, HVAC (Heater and air conditioner), or any mode button on the control panel is operated, the display turns on for that operation. If one of the control panel buttons is pressed, the display will not automatically turn off until that operation is finished. Otherwise, the screen turns off automatically after 5 seconds.

To turn the screen on:

● Press the SETTING button and select the “Display” key and then select the “Display ON” key, or

● Press the message button and the message “resuming display” will appear and the “Display ON” key will be automatically turned on (no amber indicator).

Background color:

Select the “Background Color” key; the display color changes between day and night. The new settings are automatically saved when you exit the setting screen by selecting the “Back” key or any other mode button.

Color theme:

Color theme:

Select the “Display” key, then select the “Color Theme” key. The Color Theme select screen will appear.

Select the key for the desired color. The appearance of the background, arrows and bars will change for all screens accordingly. You can choose a black, blue or red color theme.

    See also:

    USB (Universal Serial Bus) devices (if so equipped)
    This system supports various USB memory sticks, USB hard drives and iPod® players. There are some USB devices which may not be supported with this system. - Make sure that the USB device is con ...

    Push-Button Ignition Switch
    Push-Button Ignition Switch WARNING: Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed ...

    Trailer brakes
    If your trailer is equipped with a braking system, make sure it conforms to federal and/or local regulations and that it is properly installed. Never connect a trailer brake system directly ...