Emergency engine shut off
To shut off the engine in an emergency situation while driving perform the following procedure:
– Rapidly push the push-button ignition switch 3 consecutive times, or
– Push and hold the push-button ignition switch for more than 2 seconds.
See also:
Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with All-Wheel Drive (AWD)
should never be tested using a two wheel
dynamometer (such as the dynamometers used
by some states for emissions testing), or similar
equipment. M ...
Seat belts with pretensioners (front seats)
- The pretensioners cannot be reused
after activation. They must be replaced
together with the retractor
and buckle as a unit.
- If the vehicle becomes involved in a
collision but a prete ...
Rear-facing child restraint installation using the seat belts
● The three-point seat belt with Automatic
Locking Retractor (ALR) must be
used when installing a child restraint.
Failure to use the ALR mode will result
in the child restraint not b ...