See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Emergency engine shut off
To shut off the engine in an emergency situation while driving perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times, or – Push and hold the push- ...

Master warning light
When the ignition is in the ON position, the master warning light illuminates if any of the following are displayed on the vehicle information display. ● No key warning ● Low fuel w ...