See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Locking doors
Locking doors 1. Place the ignition switch in the LOCK position. (Remove the key if any key is in the ignition switch.) 2. Close all doors. 3. Push any door handle request switch 1 while ca ...

NISSAN Intelligent Key™ With Door and Trunk
WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences bef ...