Windshield-washer fluid

Fill the windshield-washer fluid reservoir periodically.

Fill the windshield-washer fluid reservoir periodically. Add windshield-washer fluid when the low windshield-washer fluid warning light comes on.

To fill the windshield-washer fluid reservoir, lift the cap off the reservoir and pour the windshieldwasher fluid into the reservoir opening.

Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze. Follow the manufacturer’s instructions for the mixture ratio.

Refill the reservoir more frequently when driving conditions require an increased amount of windshield-washer fluid.

Recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent.

CAUTION

● Do not substitute engine anti-freeze coolant for windshield-washer fluid. This may result in damage to the paint.

● Do not fill the windshield-washer fluid reservoir with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the windshieldwasher fluid reservoir.

● Pre-mix washer fluid concentrates with water to the manufacturer’s recommended levels before pouring the fluid into the windshield-washer fluid reservoir. Do not use the windshield-washer fluid reservoir to mix the washer fluid concentrate and water.

    See also:

    A Cube With a View
    The Cube is a few inches narrower than its boxy competitors, but it has plenty of headroom. Proving again that dimensions don't tell the whole story, the Cube's front seat could use a little more ...

    Fastening the seat belts
    1. Adjust the seat. See “Seats” earlier in this section. 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. & ...

    Remote keyless entry system (models without NISSAN Intelligent Key™) (if so equipped)
    ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences befo ...